The electric saw motor is a woodworking electric tool that uses a rotating chain saw blade for sawing. Let’s first understand the specifications for the use of electric chain saws: what are the preparations? What should be paid attention to during the operation?
Preparations for the use of the chainsaw motor:
Safety shoes must be worn during work.
It is not allowed to wear large, open clothes and shorts, and no accessories such as ties, bracelets, anklets, etc. are allowed to be worn during work.
Carefully check the degree of wear of the saw chain, guide plate, sprocket and other components and the tension of the saw chain, and make necessary adjustments and replacements.
Check whether the switch of the electric chain saw is in good condition, whether the power connector is firmly connected, and whether the cable insulation layer is worn.
Thoroughly inspect the work site and remove stones, metal objects, branches and other discards.
Choose safe evacuation channels and safe areas before operation.
Precautions for the operation of the electric saw motor:
When the processed original strip is within 1.5m from the conveyor, no operation is allowed.
Before turning on the power, the electric chain saw switch must be turned off to prevent accidental start.
Before making lumber, start the electric chain saw and run idling for 1 min to check whether it is running normally.
When starting or operating, the hands and feet should not be close to the rotating parts, especially the upper and lower parts of the chain.
When the fuse is blown or the relay is tripped, check immediately.
The line is not allowed to work overloaded, and is not allowed to connect to high-capacity fuses.
The electric chain saw must be operated with both hands.
Be sure to stand firm when working. Do not stand under the original strip or log and operate on the original strip or log that may roll.
When troubleshooting the clamp saw, special attention should be paid to the safety of auxiliary personnel.
During the operation, the sawing mechanism should be lubricated and cooled at any time.
When the original strip is about to be sawed, pay attention to the movement of the wood, and quickly lift the electric chain saw after sawing.
The electric chain saw switch must be turned off when transferring, and no running is allowed during the transfer
Post time: Jul-23-2021