What kind of motor the lawn mower motor belongs to
One is a traditional conventional internal combustion engine power system represented by a small gasoline engine or a diesel engine. The characteristics of this kind of power system are: high power and long continuous working time, but the biggest disadvantage is the large noise and vibration. Therefore, the products of this kind of power system are suitable for places with low environmental requirements.
The other is a new type of power system that uses batteries as a power source. The power supply system is characterized by low working noise and stable operation. Its biggest disadvantage is low power, short continuous working time, frequent charging, and it is not suitable for working in a place far away from the charging power source. First look at the traditional power system using gasoline engine and diesel engine power source. This category can choose 5-7 horsepower diesel engine or gasoline engine. The engine provides all the power for the machine to walk and mowing. The engine screws are installed under the engine bracket. The main components of the engine are: fuel tank, water tank and combustion cylinder. There is a fuel tank cap on the fuel tank. After opening the fuel tank cap, there is a filter inside. When the fuel is added to the fuel tank through the filter, the debris in the oil can be filtered out. The lower part of the fuel tank is the fuel tank switch. This is the open position, this is the closed position. The fuel in the fuel tank is sent to the combustion cylinder of the engine through the fuel pipe. There is a water tank cover and a water level buoy on the water tank. The higher the water level in the tank, the higher the position of the buoy. The clean water in the water tank is mainly used to cool the engine. This machine uses a single engine, use the handle to manually start the engine. This is an air filter, and outside air enters the combustion cylinder through the air filter. This is the fuel port. There is an organic dipstick on it, which can display the oil level. The oil is added from here, and the oil is used to lubricate the engine. Throttle switch, the size of the throttle can be controlled by cable. When the switch is in the highest position, the throttle is closed and the machine stops. When the switch is in the bottom position, the throttle is at its maximum. There is an engine power output wheel on the other side of the engine. Remove the metal shield on one side, you can clearly see the power transmission system.
Post time: Jun-18-2021