Keep others away from the lawn mower
In the process of using the small lawn mower motor, except for the person operating the lawn mower, no one should be near the lawn mower. Although the lawn mower can be controlled, sometimes the lawn is inevitably slippery and slippery. , The friction between the lawnmower and the ground is relatively small, and it is easy to cause the lawnmower to detach. Therefore, during the mowing process, you must avoid standing around the lawnmower to avoid hurting other people.
Complete installation of all parts
In the process of using the small lawn mower motor, all parts of the lawn mower must be installed completely, especially many lawn mowers have protective covers on them. Because the protective covers have blades, you must The protective cover is installed and installed to avoid the burning of the motor caused by the rope exceeding the installation range.
Don’t use a lawn mower when it’s wet
In the process of using the lawnmower, if it is relatively humid, in this case, it is best not to use the lawnmower, especially if it has just rained or the lawn has just been sprinkled with water. If you use the lawnmower at this time, The ground is very slippery and the mower may not be stable to control, so it is best to mow when the weather is clearer.
Regularly clean the inside of the lawn mower
In the process of using the lawn mower, clean the inside of the small lawn mower motor regularly, because after the lawn mower is used for a long time, there will inevitably be some fine grass inside the lawn mower, which will not be cleaned for a long time. Otherwise, it will easily affect the life of the motor, so after using the lawn mower for a period of time, clean the inside of the lawn mower regularly.
Protect the blades of the lawn mower
In the process of using the lawn mower, you must protect the blade of the lawn mower. During the mowing process, there are some dense grasses that may block the blades. At this time, the front end of the lawn mower must be decisive. Turn off the power of the lawn mower at the same time, so that it is not easy to damage the motor of the lawn mower.
Control the speed of mowing
In the process of using a lawn mower, you must master the speed of mowing. If the grass is very dense during the process of mowing, you must reduce the speed of mowing at this time. The speed should not be too fast. If the grass is not very dense, you can increase the mowing speed slightly.
Do not touch other hard objects
In the process of using the lawnmower, in order not to damage some parts of the lawnmower, do not let the lawnmower touch other hard objects. For example, during the mowing process, some stones or other objects may be touched. For some flower pots, in this case, you must pay attention to avoiding these objects when mowing the grass.
Pay attention to storage
In the process of using the lawnmower, if the lawnmower has been used up, it must be properly stored, and the lawnmower should be placed in a relatively dry and ventilated place, so that it is not easy to damage the parts of the lawnmower .
Post time: Jun-25-2021